Service temp: 300 ºF/149 ºC     Pot life: 40 min

Qualified to MMM-A-132 Type 1, Class 3

An amber, liquid compound formulated to remove rust, paints, lube oils, drawing pastes,cutting oils and protective oils from ferrous alloys by immersion methods.

Immersion Cleaner for Aluminum and aluminum alloys.

Meant primarily for for touch-up, corrosion repair processes of magnesium alloys

Cure temp: 77 ºF/ 25 ºC     Pot life: 75 min

Qualified to MMM-A-132, Rev A, Type 1, Class 3

Cure temp: 77 ºF/25 ºC     Pot life: 30 min

Bell peel: 15 lb/in, 70 N/25 mm     Service temp: 180 ºF/82 ºC

Bell peel: 75 lb/in, 335 N/25 mm     Service temp: 180 ºF/82 ºC

Bell peel: 60 lb/in, 265 N/25 mm     Service temp: 180 ºF/82 ºC

Bell peel: 60 lb/in, 265 N/25 mm     Service temp: >225 ºF/107 ºC

Bell peel: 60 lb/in, 265 N/25 mm     Service temp: 180 ºF/82 ºC

Service temp: 250°F/121°C   Density: 42 pcf/0.67 g/cc

Service temp: 250 ºF/121 ºC

Honeycomb Climbing Drum Peel: 20 in*lb/in, 90 m*N/m

Service temp: 350 ºF/ 177 ºC

Density: 37 pcf/0.60 g/cc     Service temp: 300 ºF/149 ºC

Service temp: 300 ºF/149 ºC     Pot life: 40 min

Qualified to MMM-A-132 Type 1, Class 3

Service temp: 225 ºF/107 ºC     Pot life: 15 min

Service temp: 250 °F/121 °C     Pot life: 40 min

Service Temp: 350 °F/177 ºC     Pot life: 75 min

Service Temp: 350 °F/177 °C     Pot life: 90 min

Qualified to MMM-A-132 Rev A, Type I, Class 3

Service temp: 400 ºF/204 ºC     Out time: 15 days

Service temp: 420 ºF/216 ºC     Out time: 10 days

Blue, one component, room temperature drying primer

Service temp: 350 ºF/177 ºC     Density: 8-25 pcf/0.12-0.40 g/cc

Service temp: 450 ºF/232 ºC     Expansion ratio: 2-3x

Service temp: 350 ºF/177 ºC     Expansion ratio: 2-3.5x

Service temp: 350 ºF/177 ºC     Expansion ratio: 2-3x

Service temp: 350 ºF/177 ºC     Out time: 100 days

Service temp: 350 ºF/177 ºC     Out time: 14 days

Service temp: 350°F/177°C     Out time: 90 days

Gel time: 40-60 min   Density: .70 g/cc   Viscosity: soft paste

Self Extinguishing, Soft Paste, Non-Sagging, One-Hour Work Life

Low Density System, 2:1 Mix Ratio, High Compressive Strength

Low Density Syntactic, Thick Paste Consistency, High Compressive Strength

High Density, High Temperature Potting Compound, Self-Extinguishing

Ultra Low Density Syntactic, Self-Extinguishing, Soft Paste Consistency

Room Temperature Cure, Quick Set, Non-flow Paste

P3^® 116™ Saf-T-Clean is a low to zero foam, HAPs free, non-corrosive (pH<12), water-based cleaner for uncured paint.

Room Temperature Cure, Long Work Life, Non-flow Paste

P3^® 2485A™ Clear Masking is used as a water removable, temporary protective coating for spray booth windows, walls, and grates where overspray accumulation must be readily removed.

An amber, liquid compound formulated to remove rust, paints, lube oils, drawing pastes,cutting oils and protective oils from ferrous alloys by immersion methods.

Alodine^® 600™ RTU is a ready-to-use, liquid product which produces a chromate conversion coating on aluminum and its alloys.

For cleaning ferrous and non-ferrous alloys by spray, immersion and ultrasonic methods at low temperatures.

Alodine^® 871™ Touch-N-Prep^® Coating is formulated for both bare corrosion protection, such as ASTM 921-02, and bonding applications when combined with organic coatings or structural adhesives.

Green, Excellent storage and outtime stability

A zero VOC material that can be quickly peeled from any surface, even when heavily laden with overspray.

A clear, low VOC material that can be quickly peeled from any surface, even when heavily laden with overspray.

Room Temperature Cure, Good Electrical Properties, For Smoothing, Bonding and Filling

A low-density, one-component epoxy syntactic for use on honeycomb composite parts requiring high compressive strength up to 350°F

Alodine® 1200S™ used to produce a protective coating on aluminum and improved bond for paint.  Listed on QPL-81706 and produces Class 1A & 3 coatings in accordance with MIL C-5541C.

Room Temperature Cure Paste, Extremely Tough and Resilient

PARCOSOL® 283™ is HAP’s Free (Hazardous Air Pollutant), 2°F flash point organic solvent blend used for internal and external cleaning of solvent-borne paint application equipment.

24 oz/yd² Plain Weave

This product is HAP's compliant(Hazardous Air Pollutant), 60°F flash point, organic solvent blend used for internal and external cleaning of solvent-borne paint application equipment.

General Purpose Adhesive Room Temperature Cure, Variable Properties

Product can be used in immersion or pressure spray washers and is approved to MIL-DTL-81706B.

Formulated as a ready-to-use material for manual spray applications.

Room Temperature Cure, Non-Flow Paste, Long Work Life

Long Work Life, High Strength Adhesive, Qualified to BMS 5-126

Bonds Plastic and Metal, Good Composite Bonding

Self Extinguishing Adhesives, Gap Filling Properties, Early Green Strength

Toughened, Performance to 350°F (177°C), Low Sag Paste

Vinyl Bonding Adhesive, Low Viscosity, Self Extinguishing