Nylon Breather

Nylon Breather DESCRIPTION:
Nylon Breather comes in densities ranging from 6 oz/yd² to 13 oz/yd².The fabric capable of operating at temperatures up to 450°F (232°C) and pressures over 200 psi.

APPLICATION:
Nylon Breather will provide good air removal during normal vacuum bag or low pressure autoclave cure cycles without trap off. It resists compression and heat set as experienced by other lower temperature resistant fibres. Nylon Breather is a non-hazardous material.

TECHNICAL DATA:


TYPICAL VALUES
ColorWhite
FiberNylon
Maximum Use Temperature400°F (205°C)
WEIGHT
THICKNESS
6 oz/yd² (203 gsm) + 10%0.110 in
10 oz/yd² (339 gsm) + 10%0.150 in
13 oz/yd² (441 gsm) + 10%0.170 in

The above values are “Typical Values” which have a nominal range about them and are not intended for specification purposes.

AVAILABILITY: Minimum order quantity may apply
Standard roll size  6 oz
                           60″ x 100 yards (1.52m x 91.4m)
                           10/13 oz
                           60″ x 50 yards (1.52m x 45.7m)